Griffin Tools & Supply, LLC

Specializing in Undercar Products & Earth Friendly Shop Supplies

Heavy Duty 4 Post Truck Lifts

Heavy Duty Four Post Lifts - are available in 20,000, 25,000 and 30,000 pound configurations. Manufactured by Whip Industries, a US Manufacturer that has been building automotive lifts for over a quarter century. Runway width of 24” two wheel alignment wheelbases from 220” up to 340”.

KP440NE - KP440E

Two lifting screws in each column

The motors are inter-connected mechanically by line shafting and bevel gear boxes in oil bath to ensure the perfect level of the platforms and balanced load on motors regardless of vehicle position. Only one adjustment is made during the installation, never during operation as there are no parts subject to yielding or lengthening such as cables  and load bearing chains.

Motor protection by thermal relay is provided to prevent burning out in case of overloading or lack of one phase.

The platform length and the capacity of these lifts make them ideal for busses and trucks.

EXTENDED PLATFORMS

 

Maximum access to the vehicle thanks to the special concept of extended platforms, unique feature of the Ravaglioli range of commercial lifts.

 

Space is freely available to reach any part, including the engine.

KP118N - KP118NP / 13,5T

Twin-piston hydraulic/air-hydraulic wheel-free jack

Operated by means of hand-pump or air-hydraulic pump (version NP)

Pneumatic feed pressure 6 ÷10 bar

Translation on ball bearing

Heavy Duty Lift Specifications

Model Number

WFP25R

WFP25R-E

WFP30R

WFP30R-E

Maximum Wheelbase (in)

230.00

290.00

230.00

290.00

Rise (in)

68.00

68.00

68.00

68.00

Length Overall (in)

295.00

355.50

295.50

355.50

Width Overall (in)

149.50

149.50

149.50

149.50

Height Overall (in)

92.00

92.00

92.00

92.00

Inside of Columns (in)

132.50

132.50

132.50

132.50

Between Columns (in)

233.75

293.75

233.75

293.75

Width of Runways (in)

24.00

24.00

24.00

24.00

Height of Runways (in)

9.00

9.00

9.00

9.00

Width between Runways (in)

54.75 - 75.00

54.75 - 75.00

54.75 - 75.00

54.75 - 75.00

Lifting Capacity

25,000 LBS

25,000 LBS

30,000 LBS

30,000 LBS

Motor

5 HP

5HP

5 HP

5HP

Voltage-Single Phase

203-230

203-230

203-230

203-230

(Amps Required)

30

30

30

30

Speed of Rise (sec)

105

105

105

105

Min. Recommended Bay Dimensions

15'6" x  30'-0"

15'6" x  35'-0"

15'6" x  30'-0"

15'6" x  35'-0"

NOTE: 25,000 and 30,000 Lb. lifts are available with cut outs for turntables and rear slip plates to provide 2 and 4 wheel alignment capability